TBC-1 Stainless Steel Folding Mop Sink
TBC-1 combines a stainless steel basin, upright frame, hanging hooks and mobile castors for mop washing and tool organization in restaurants, hotels, canteens and commercial cleaning rooms.
Key details from the product range
For mop washing and cleaning-room organization in restaurant kitchens, hotels, canteens and service areas.
An upright frame and mobile castors allow the station to be moved between cleaning areas.
Upper hooks provide storage for mops, brushes and cleaning tools.
TBC-1 model and dimensions
TBC-1 Stainless Steel Folding Mop Sink
930 × 740 × 1550 mm
Stainless steel. Confirm SUS201 or SUS304 and the required thickness before ordering.
Share the project details for pricing
Confirm the number of units and whether they are for a kitchen, cleaning room, hotel service area or canteen.
Share the available floor space and access route to the cleaning area.
Provide the destination and any packing requirements.
Plan the TBC-1 Cleaning Station
The TBC-1 is listed at 930 × 740 × 1550 mm and combines a stainless steel basin, upright frame, hanging hooks and mobile castors. Check the full footprint, wheel clearance and delivery route into the cleaning area before ordering.
Plan the station near the cleaning area and verify the basin water supply, waste connection, faucet arrangement and required material grade. The page lists SUS201 or SUS304; confirm the chosen grade and thickness for this order.
Check Space, Access and Cleaning
Measure the floor space and the route through doors, turns and lifts. Leave room to use the basin, roll the castors if needed, hang cleaning tools and reach the surrounding area for routine cleaning.
Confirm the water supply, waste position, floor condition and access for the installed location. If the unit will be moved between cleaning areas, ask the supplier to confirm the movement route and castor suitability.
Details to Confirm for the Selected Model
Send the TBC-1 model code, location, available footprint, water and drain positions, quantity and destination. Ask for the product drawing and confirm material and installation details before quotation.
Check that the 930 × 740 × 1550 mm unit and its delivery route fit the site.
Confirm the basin, upright frame, hanging hooks and mobile castors supplied with TBC-1.
Confirm water supply, waste connection, faucet arrangement and floor requirements at the site.
Request cleaning instructions for the stainless steel basin, frame and castors.
TBC-1 Mop Sink FAQs
The listed overall dimensions are 930 × 740 × 1550 mm. Check the site footprint and access route against the product drawing before ordering.
SUS201 or SUS304 are listed for confirmation. Specify the required grade and sheet thickness in your enquiry; confirm availability for TBC-1.
The product description shows a stainless steel basin, upright frame, hanging hooks and mobile castors. Confirm components and any requested accessories in the quotation.
Confirm the model drawing, material grade, water and waste connections, packing and delivery details with the supplier before ordering.